Philips PT923 Manual page 46

english
46
Problem
The Jet Clean
System does not
work when I press
the on/off button.
Water leaks from
the shaver after
cleaning.
Possible cause
You have not closed the
locking lever of the Jet Clean
System properly, or you have
not placed the shaver in the
Jet Clean Shaver properly.
In these cases the Jet Clean
System starts to operate, but
the cleaning program is not
performed properly.
The Jet Clean System is not
connected to the mains.
This is normal and not
dangerous.
Solution
Place the shaver without
protection cap in the Jet Clean
System properly. Close the
locking lever properly.
Put the small plug in the Jet
Clean System and put the
adapter in the wall socket.
During rinsing some water
may collect between the
power unit and the housing.
After rinsing this water flows
out through the socket. The
power unit is completely
watertight so water cannot
reach the electronic parts
of the shaver. Your shaver
continues to be absolutely
safe.