Configure Your Device; Adjust The Image - Axis M3068-P User Manual

AXIS M30 Network Camera Series

Configure your device

Configure your device

Adjust the image

This section includes instructions about configuring your device. If you want to learn more about how certain features work, go
to Learn more on page 43.
Rotate the image with digital roll
Note
If you rotate the image, all views are affected.
To rotate the 360° view, go to Video > Installation and use the Roll slider.
You can also enter a value for the roll angle in the text field.
Configure the quad view
Note
Quad view is available in these mounting positions:
• Desk
• Ceiling
1. Click
2. Select Quad view among the live feed sources.
3. Go to Settings > System > Orientation and click
4. To change the view order, drag and drop the yellow boxes.
About capture modes
This product has several possible views defined as capture modes. You can access all capture modes from the drop-down list in the
product's live stream view.
Note
If you select capture mode "360° overview only @ 60/50 fps no WDR" on AXIS M3067-P or capture mode "360° overview
only @ 30/25 fps no WDR" on AXIS M3068-P, you will only have Overview as an option. For other capture modes, see
the table for supported views and resolutions.
View
Overview
Panorama
Double Panorama
and select Legacy device interface.
Symbol
.
Aspect ratio Resolutions for
AXIS M3067-P
1:1 2016x2016 to 160x160
8:3 2560x960 to 192x72
16:9 2560x1440 to 256x144
32:9 2560x720 to 1280x360
4:3 2560x1920 to 256x192
16:9 2560x1440 to 512x288
6
Resolutions for
AXIS M3068-P
2880x2880 to 160x160
3584x1344 to 192x72
3840x2160 to 256x144
3584x1008 to 128x360
3584x2668 to 384x288
3584x2016 to 512x288