Table of Contents
Advertisement
AXIS M30 Network Camera Series
Configure your device
Note
When you increase the gain, image noise also increases.
•
Set Max shutter to a shorter time, and Max gain to a higher value.
If you still have problems with motion blur:
•
Increase the light level in the scene.
•
Mount the camera so that objects move toward it or away from it rather than sideways.
Maximize the details in an image
Important
If you maximize the details in an image, the bitrate will probably increase and you might get a reduced frame rate.
•
Go to Video > Stream > General and set the compression as low as possible.
•
Below the live view image, click
•
Go to Video > Stream > Zipstream and select Off.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
and in Video format, select MJPEG.
Image without WDR.
Image with WDR.
8
Advertisement
Table of Contents
