Philips P Line 65BDL3017P User Manual page 30

The existing daylight on/off menu should be replaced by
the following menu structure:
The menu item {Daylight saving} opens the submenu that
contains the following items:
• Menu item {Daylight saving start date} Selection item {1st,
2nd, 3rd, 4th, last} Sunday of selection item {1-12 month}
• Menu item {Daylight saving stop date} Selection item {1st,
2nd, 3rd, 4th, last} Sunday of selection item {1-12 month}
• Menu item {Correction time} Selection item {0.5, 1.0, 1.5,
2.0} hour
Menu item {Daylight saving} Selection item {on, off}
•
When "daylight saving" is "on", the real time clock will be
adjusted automatically at the daylight saving time (e.g.
April 5, 2015, 02.00 o'clock: time will be set 1 hour later
or October 25, 2015, 02.00 o'clock: time will be set 1 hour
earlier).
Schedule
This function allows you to program up to 7 (seven) different
scheduled time intervals for the display to activate.
You can select:
• The time for the display to turn On and Off.
• The days in a week for the display to activate.
• Which input source the display will use for each
scheduled activation period.
Note: It is recommended that you set up the current date
and time in the {Date and time} menu before using
this function.
1. Press [OK] or [ ] button to enter the submenu.
Schedule 1
Schedule 2
Schedule 3
Schedule 4
Schedule 5
Schedule 6
Schedule 7
2. Press [ ] or [ ] button to select a schedule item (item
number 1 - 7), and press [OK] or [
submenu.
Schedule 1 Status
Schedule 2 Source
Schedule 3 On Time
Schedule 4 Off Time
Schedule 5 Repeat modes
Schedule 6 USB Play List
Schedule 7
• {Status} - Press [ ] or [
On or Off.
{Source} - Press [ ] or [
•
source.
Schedule
] button to enter the
Schedule
Off
HDMI1
-- : --
-- : --
None
] button to select the status
] button to select the input
• {On Time} - Press [
display will turn on at the specified time.
{Off Time} - Press [
•
display will turn off at the specified time.
Leave hour and minute options empty if you do not want
to use the function of power-on or power-off schedule.
• {Repeat modes} -Press [
in a week this schedule item will take effect, and then
press the [OK] button.
3. For additional schedule settings, press [
the steps above. A check mark in the box next to the
number of the schedule item indicates that the selected
schedule is in effect.
NOTES:
• If the schedules overlap, the scheduled power-on time
takes priority over scheduled power-off time.
• If there are two schedule items programmed for the
same time, the highest numbered schedule takes
priority. For example, if schedule items #1 and #2 both
set the display to power on at 7:00 AM and off at 5:00
PM, then only schedule item # 2 will take effect.
HDMI with One Wire
CEC control.
• {Off} - Disable CEC.(Default)
• {On} - Enable CEC.
Auto signal detection
This function allows the display to detect and display
available signal sources automatically.
• {Off} - Once an input is connected, it can only be
selected manually.
If the selected input has signal, set the system to display the
image automatically according to the search order of each
option.
The options are: {Auto} / {Failover}
• {Auto}: Dispalyport->VGA->DVI-I->HDMI1->HDMI2-
>HDMI3->Media Player
• {Failover}
-
Failover 1: User-defined setting. Default:HDMI 1.
-
Failover 2: User-defined setting. Default:HDMI 1.
-
Failover 3: User-defined setting. Default:HDMI 1.
-
Failover 4: User-defined setting. Default:HDMI 1.
-
Failover 5: User-defined setting. Default:HDMI 1.
-
Failover 6: User-defined setting. Default:HDMI 1.
-
Failover 7: User-defined setting. Default:HDMI 1.
If the primary signal is lost then the display begin failover
by searching the next available source that is defined in the
priority list.
Please note that failover will suspend under the following
conditions and failover will resume when signal is lost again.
-
Boot On Source : When the display is powered on, it
will go to the source defined in this OSD option.
-
Scheduler: When the display is powered on by
scheduler, it will go to the corresponding source
according to the current time.
19
65BDL3017P
] or [ ] button to adjust and the
] or [ ] button to adjust and the
] button to select which day
], then repeat