Craftsman 37763 Owner's Manual page 17

TROUBLE SHOOTING
;)ROBLEM CAUSE CORRECTION
Loss of drive
(Self-Propelled
Mowing)
Grass catcher
not filling (If so
equipped)
Hard to push
• Drive wheels not turning
with drive control engaged.
• Belt not driving.
• Cutting height too low.
• Lift on blade worn off.
• Catcher not venting air.
• Grass is too high or wheel
height is too low.
• Rear of lawn mower
housing/blade dragging
in grass.
• Grass catcher too full.
• Handle height position not.
right for you.
• Adjust or replace drive control
cable, if broken.
• Put belt on pulleys or replace
belts if broken.
• Raise cutting height.
• Replace blade.
• Clean grass catcher.
• Raise cutting height.
• Raise rear of lawn mower
housing one (1)
setting higher.
• Empty grass catcher.
• Adjust handle height to suit.
17