Table of Contents
Advertisement
Assembling the swivel
Some models support the swivel function. Supported swivel angles are 20°, 60° and 90°, and you can change the swivel
angle using BRACKET HOLDER SWIVEL.
Support the swivel models :
HG**EE670
HG32EE470
HG40EE470
HG48EE470
HG32AE570SW/K
HG40AE570SW/K
HG43AE570SW/K
HG48AE570SW/K
20° ~ 60° swivel
If you assemble the wedge on the bottom of the stand to the hole of BRACKET HOLDER SWIVEL where 20° or 60° is
marked, the swivel angle becomes 20° ~ 60° in the left and right side.
(The shape of the stand depends on the model.)
90° swivel
If you assemble only screws after you remove BRACKET HOLDER SWIVEL, the swivel angle becomes each 90° in the left
and right side.
14
English
Advertisement
Table of Contents
