Siemens CD634GA 0 Series User Manual And Installation Instructions page 18

Hide thumbs Also See for CD634GA 0 Series:
Table of Contents

Advertisement

en Cleaning and servicing
Running the first rinse cycle
Remove the descaling solution from the evaporator
1.
dish using the cleaning sponge provided and then
thoroughly rinse the cleaning sponge with water.
Remove the water tank and rinse thoroughly.
2.
Fill the water tank with water and then slide it back
3.
into the appliance.
Close the appliance door.
4.
Press
⁠ .
5.
a The appliance will rinse itself for approx.
20 seconds.
Open the appliance door.
6.
Remove the remaining water from the evaporator
7.
dish using the cleaning sponge.
Proceed to the second rinse cycle. → Page 18
8.
Running the second rinse cycle
Remove the water tank and rinse thoroughly.
1.
Fill the water tank with water and then slide it back
2.
into the appliance.
Close the appliance door.
3.
Press
⁠ .
4.
a The appliance will rinse itself for approx.
20 seconds.
Remove the remaining water from the evaporator
5.
dish using the cleaning sponge.
Wipe down the cooking compartment using the
6.
cleaning sponge and then dry with a soft cloth.
Switch off the appliance.
7.
a The appliance is now ready for use again.
Descaling the evaporator dish
If necessary, you can descale the evaporator dish sep-
arately. To do this, you can either use your appliance's
descaling function or you can descale the evaporator
dish manually.
ATTENTION!
Using non-recommended descaler may damage the
appliance
Only use the liquid descaler recommended by us
for the descaling programme. The time the descaler
needs to be left to work depends on the product
used.
If descaling solution comes into contact with the control
panel or other delicate surfaces, it will damage them.
Remove descaling solution immediately with water.
Mix 100 ml water with 20 ml liquid descaler to
1.
make a descaling solution.
Completely fill the evaporator dish with descaling
2.
solution.
Fill the water tank with water and then slide it all the
3.
way into the appliance.
Close the appliance door.
4.
Start the descaling process. → Page 17
5.
18
12.7 Appliance door
To clean or remove the door panels, you can detach
the appliance door.
The appliance's door hinges each have a locking lever.
When the locking levers are closed, the appliance door
is secured in place. The appliance door cannot be re-
moved when it is secured like this.
When the locking levers are open, the hinges are se-
cured and cannot snap shut.
Detaching the appliance door
When the locking levers for detaching the appliance
door are open, the hinges are secured and cannot
snap shut.
WARNING ‒ Risk of injury!
When the hinges are not secured, they can snap shut
with great force.
Make sure that the locking levers are always either
fully closed or (when detaching the oven door) fully
open.
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
Open the appliance door fully.
1.

Advertisement

Table of Contents
loading

Table of Contents