Samsung QMT Series User Manual page 81

2nd 3rd
Touch Control
Touch Control
Admin Menu Lock
Device to Control
Time
Clock Set
NTP Settings
DST
Power On Delay
Description
Set the functions related to touch control.
" This function may not be supported depending on the model.
Prevent touch gestures from controlling your device.
Set the Admin Menu Lock to display the administrator settings menu when you tap and hold the finger on the screen.
" Available only when Touch Control
Specify a source to control by touch input. If you are playing touchable content created in the author program, select
Connected Source Device. In this case, you will need to use the remote to control the device menu.
" This function may not be supported depending on the model.
You can configure Clock Set or DST. Configure various time-related settings.
Select Clock Set. Select Date or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow buttons to
move from one entry field to the next. Press E when done.
" You can set the Date and Time directly by pressing the number buttons on the remote control.
Set up the server URL and time zone to use the network time.
Switches the DST (Daylight Saving Time) function on or off.
" Start Date, End Date and Time Offset
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within the range
0–50 seconds).
is set to On.
are enabled only when DST is set to On.
81