Table of Contents
Advertisement
5.
If the computer is on a stand, remove the computer from the stand.
6.
Remove the computer access panel.
7.
Rotate the drive cage for internal drives to its upright position.
Figure 2-62
8.
Rotate the power supply to its upright position. The hard drive is located beneath the power
supply.
NOTE:
from the rear of the computer so that the connectors do not block the power supply from rotating
all the way back.
Figure 2-63
52
Chapter 2 Hardware Upgrades
Rotating the Drive Cage Up
If you are using a PS/2 mouse and/or PS/2 keyboard, make sure they are unplugged
Raising the Power Supply
Advertisement
Table of Contents
