Remote Control Functions - TCL 32S6000S Operation Manual

Chapter 2

Remote control functions

Most of your television's functions are available via the menus that appear on the screen. The remote control
supplied with your set can be used to navigate through the menus and to configure all the general settings.
Note: You are recommended to use the full screen mode. Do not use the display mode with black bars on
both sides of the picture (such as 4:3) for a long time; otherwise the TV screen may be damaged permanently.
To switch the sound off and back on.
Standby / quit standby.
0-9 buttons To enter channel numbers; to enter a letter, a digit or a symbol
in some functions.
PRE-CH To return to the previous channel in TV mode.
LIST To display the channel list.
To control the volume.
+/-
To display programme information, if available.
P
To change channels.
/
To display the Settings menu.
To access the Smart TV homepage.
To display the Option menu.
▲/▼
To navigate through the menus; to select menu options.
◄/►
To navigate through the menus; to select menu options and
change values.
To confirm an entry or selection.
OK
To return to the previous menu.
To select connected devices.
EXIT To exit the menu, homepage or Teletext, etc.
GUIDE To toggle the Electronic Programme Guide on or off (only
available for digital channels).
LANG To select a sound type available for selected analogue
TV programme; to select an audio language available for
selected digital TV programme.
TEXT To toggle Teletext on or off.
SUBT. To select a subtitle language available for selected digital TV
programme.
Colour To select tasks or Teletext pages; to be used for HbbTV
buttons function.
Recording button. (Not available for some models.)
REC
To start fast reverse.
To pause playback.
To start fast forward.
To start playback.
To stop playback.
To access the Netflix homepage.
NETFLIX
Note: The remote control type may be changed without notice.
Connection and Setup
6