Remote Control Functions - TCL 40D2900F Operation Manual

Remote Control Functions

Most of your television's functions are available via the menus that appear on the
screen. The remote control supplied with your set can be used to navigate through
the menus and to configure all the general settings.
Mute
(MUTE) Reduce the TV's volume to its minimum level. Press again
to restore the volume.
(On/Off button) Turns the TV on or off.
0-9 (numeric buttons) Enters channel numbers.
Info Display the status information.
Return Return you to the previous channel in TV mode.
Source Press to select signal source.
Menu Bring up the menu system.
(up, down, left and right direction buttons) Highlights different items
in the menu system and adjusts the menu controls.
OK Confirm your selection.
Option
Enters the record function.
Note: the speed will be slow by using U disk, it is better to use
hard disk .
Exit Exits the menu system.
VOL +/- Increase or decreases the TV's volume.
CH +/- Scan up or down through the current channel list.
Zoom +/- Press to select the desired screen format.
(In USB mode, it is un
ECO
Press to enter saving energy mode.
Guide Display the information of digital program.
(Only available in digital mode)
Text Teletext
Subtitle
Press to display the Subtitle Language menu.
List Press to select the Channel List.
TV In DTV mode, presses to switch DTV and RADIO.
In the other sources, presses to back DTV.
In corresponding mode, press it to enter the right function as hint.
Red button
Green button In corresponding mode, press it to enter the right function as hint.
In corresponding mode, press it to enter the right function as hint.
Yellow button
Blue button In corresponding mode, press it to enter the right function as hint.
(In USB mode, press to select sound track mode )
6
Introduction
available .)