Page 1
OPERATION MANUAL For use with models: E5900 series/E6000 series series/C1 series/P10 series Figures and illustrations in this User’s Guide are provided for reference only and may di er from actual product appearance. Product design and speci cations may be changed without notice.
Table of Contents Chapter 1: Safety Information Precautions ............................3 Product ............................3 Power and Plug ..........................3 Power Cord and Signal Cable ......................3 Use Environment ..........................3 Cleaning ............................3 Hanging the TV Set on the Wall ..................... 3 Important Information ........................
Chapter 1 Safety Information Precautions as vases, shall be placed on the apparatus. • Do not use the set in dusty environments. Read all of the instructions before operating the set. • Operating Temperature: 5℃ to 35℃(41°F to 95°F) Keep these instructions well for future use. Operating Humidity: 20% to 80%,non-condensing Storage Temperature: -15℃...
Chapter 2 Connections and Setup TV Controller Type 1: TV Controller is a multi directional button that helps navigate without remote control. For some models, there's only one TV button--TV Controller. Note: The product colour and shape may vary depending on the model. Turns the TV on by pressing the Controller when the TV is in standby mode.
Connections and Setup Sockets Note: The location and names of the sockets on the TV may vary according to TV model, and not all sockets are available on all models. USB 3.0 or USB2.0 or USB 2.0/SERVICE socket (input) USB 3.0 or These sockets can be used to connect a USB device.
Connections and Setup Remote Control Functions Most of your television's functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. Note: Figures and illustrations in this operation manual are provided for reference only and may differ from actual product appearance.
Page 7
Connections and Setup To switch the sound off and back on. Standby / quit standby. To control the volume. Brings up / exit the on-screen remote control buttons. To change channels. To access the homepage. To navigate through the menus; to select menu options. To select connected devices.
Connections and Setup Network Connection Your TV will require an internet connection to operate all functions. Data usage charges may apply. Please refer to your Internet Service Provider (ISP) for additional information. To access the internet, you must subscribe to high speed broadband internet service from your internet service provider.
Connections and Setup Switching on Follow the instructions on this page on how to switch on your TV set and the remote control before going on to follow- ing pages describing how to use the channel set-up procedure. 1. Insert two AAA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified.
Connections and Setup Initial Setup Note: To prevent the channel installation process from being interrupted, wait for the message Perform the following steps before you press on the indicating that the installation is complete. You remote control. can also skip this step by selecting “I don’t want • Insert the batteries into the remote control.
Chapter 3 HomePage Note: Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. And for some models, certain options are not available. Press on the remote control to display HomePage. Press ▲/▼/◄/►...
The Pre-installed apps ▲/▼/◄/► TCL APP Store: After entering the APP store, you will see the recommendations. Press to select, press OK to enter. The Pre-installed apps: These are recommended Apps. Highlight an app and press OK to open it.
Chapter 4 Menu Operation Using Quick Access Menu will be on at the same time. ◄/► Auto standby: Use to toggle between On and Note: Some of the functions might be unavailable in Off. When Auto Standby on is set to On, TV and certain sources.
Note: TCL does not guarantee that the use of the Schedule list WiFi TV link function will be smooth or error- This function is used to perform scheduled recording.
Menu Operation power saving mode, Off, Low, High. to enter the main menu. Some options may not be available for certain signal sources. Mix dimming: Press ◄/► to select On or Off. Note: For some models, this option is not available. Advanced settings: Press OK/►...
Menu Operation Note: You must enter your personal code before Timeshift: Set Timeshift to On or Off. Default setting is entering the Country menu.The factory default code On. For details, please see the introducton of Timeshift is 1234. And the super password is 0423. If you forget on page 13.
Page 17
Menu Operation DNS values. Use the numeric buttons to enter Press ▲/▼ to select Auto and press OK/► to numbers and the ▲/▼/◄/► buttons to move enter. from one entry field to another. • PIN: Select PIN and press OK/► to enter. - Once IP setting is completed, press ▲/▼/◄/► to Choose a random PIN code.
Page 18
LAN (local area network) or network segment. Notes: 4. Run the TCL nScreen application on the laptop, it will - If DLNA is switched on, the TV will display the list of search and communicate with the TV automatically available DLNA servers which are available in local to enable the TCL nScreen functionality.
Bluetooth SIG, Inc. and any use of Display the main menu by pressing System and such marks by TCL is under license. Other trademarks select Lock, then press OK to confirm. Then press and trade names are those of their respective owners.
HDMI 1(MHL) port. • Video/Audio contents play from the mobile device, and shown on the TV. When using MHL Notes: • Interoperability with MHL devices of other • These functions may not be available depending on manufacturers is not guaranteed. Therefore, TCL does the connected equipment. not provide any guarantee against operational failure...
Advanced Functions such as that described below when an MHL source is You can play, pause or rotate the photo, select different connected to the TV. play modes and display effects, etc.. 4. Press the related buttons on the remote control to - No picture or sound.
Chapter 6 Other Information Problems & Solutions Note: Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected TV models can disregard them. 4. The video from a mobile hard disk (USB) is 1.
Other Information Troubleshooting the reception. 1. Adjust the position and orientation of the indoor/ Most problems you encounter with your TV can be outdoor antenna. corrected by consulting the following troubleshooting list. 2. Check the connection of antenna. 3. Fine tune the channel. No picture, no sound 4.
TCL is neither are sold separately. Please visit our website for more responsible nor liable for customer service related to information on specific device information and content the content and services.
Need help?
Do you have a question about the E6000 Series and is the answer not in the manual?
Questions and answers