Chapter 3 - General Operation; Accessing Channels; Watching Connected Devices; Adjusting Volume - TCL 32S6000S Operation Manual

Chapter 3

Accessing channels

Using the numeric buttons: press the
corresponding numeric buttons on the remote
control to access the channels.
Using the P buttons: press the P
/
on the remote control or the corresponding buttons
on the TV set to scroll through the channels.
Using the LIST button: press the LIST button on
the remote control to display the channel list and
press ▲/▼/◄/► and OK to select channels.

Watching connected devices

Repeatedly press on the remote control or
OK on the TV set to toggle between TV and other
input sources. Press P
channels and other input sources.
Note: Not all models have OK button on the set.

Adjusting volume

Volume control: press the
remote control or the corresponding buttons on the
TV set to increase or decrease the volume.
Sound mute: press the
button to restore the sound.

Using TV settings

1. Press on the remote control to display the
Settings menu.
2. Press ▲/▼ to select the desired item, then press
OK/► to enter the corresponding submenu.
3. In submenus, press ▲/▼ to select menu options,
then press OK/► to enter the option list, the
adjustment interface, or the corresponding
submenu.
4. Press to return to the previous menu.
5. Press EXIT or to close the menu.
Note:
You can also press
select Settings (if available) and press OK to
enter the Settings menu. Some options may not
be available for certain signal sources.
buttons
/
to cycle through all TV
/
+/- buttons on the
button to temporarily
on the remote control,
General Operation

Selecting menu language

You can choose your preferred menu language
following the instructions below.
1. Press on the remote control, select System >
Menu language > Language and press OK/► to
enter.
2. Press ▲/▼ to select your desired language to
display the menus and press OK to confirm.
3. Press EXIT or

Instant power on

This function enables you to turn on your TV quickly.
1. Press on the remote control, select System >
Instant power on and press OK/► to enter.
2. Press ▲/▼ to select On and press OK to
confirm.
3. Press EXIT or

Automatic channel search

This section describes how to search and store
channels automatically. This may be done in any of
the cases below:
- you have selected "I don't want to install
channels" in the initial setup;
+
- you see "No program info now, please search
channels first!" in TV mode;
- you want to update your channels.
1. In TV mode, press
select Channel > Channel scan. Press OK/► to
enter.
2. The TV installs and arranges channels according
to your country. Press ▲/▼ to select Country,
and press OK/► to enter. Enter the default
password 1234 or your own password in case
you have changed the password in the System >
Lock menu. Press ▲/▼ to select your country
and press OK/► to confirm.
3. Press ▲/▼ to select Tuner mode>Antenna,
then press OK/► to enter. Press ▲/▼ to select
Automatic search, then press OK/► to enter.
4. Press ▲/▼ to select Channel type (Digital &
Analogue, Digital or Analogue), then press OK
to start the automatic search for all digital and/
or analogue channels.
minutes. During the process, you can press OK to
abort halfway.
5. The channel search may take a few minutes.
During the process, you can press OK to stop the
search halfway.
6. After the automatic search, channels are
arranged in a preset order. If you wish to skip
channels, modify the preset order, rename or
delete channels, press
select Channel > Organiser and press OK/► to
enter.
10
to close the menu.
to close the menu.
on the remote control and
The search may take a few
on the remote control,