Table of Contents
Advertisement
7 SMART FUNCTION
WiFi Status Light
Slowly flashing
Quickly flashing
Quickly flashing solid Connected to your wireless router
Notes
Make sure your devices are powered on.
Keep your mobile phone close enough to your device when you are
connecting network to your device.
Connect your mobile phone to the wireless network at home, and
make sure you know the password of the WiFi.
Check if your router supports 2.4 GHz WiFi band and turn it on. If you
are not sure whether the router supports 2.4 GHz band, please
contact the router manufacturer.
The device cannot connect to the WiFi that requires authentication,
and it usually appears in public area such as hotels, restaurants, etc.
Please connect to a WiFi that does not require authentication.
It is recommended to use a WiFi name that only contains letters and
numbers. If your WiFi name contains special characters, please
modify it in the router.
Turn off the WLAN+ (Android) or WLAN Assistant (iOS) function of
your mobile phone when connecting network to your devices.
In the case that your device connected to WiFi before but it needs to
reconnect, please click "+" on app Home page, and add your device
again by the device category and model according to the instructions
on app.
Procedures to turn off the WiFi function.
1. Press [ Temp. ] 3 seconds to turn off the WiFi function.
Procedures to turn on the WiFi function
1. Press [
] 3 seconds to turn on the WiFi function.
Procedures to reset the WiFi configuration.
1. Press [
] 3 seconds to turn on the WiFi function and re-enter the
network configuration process.
2. "AP" will be displayed on the knob display.
3. Reconnect to the network based on the content of previous page.
Waiting for connection
Connecting
51
Advertisement
Table of Contents
