Table of Contents
Advertisement
USB RECORDING
Connecting external data media
Notes:
It is advised to put the television on stand-by
7
mode before connecting the External Data
medium.
Before disconnecting the external data me-
7
dium, the television must first be switched to
standby, otherwise files can be damaged.
On TV, there are two USB ports, USB2
7
(HDD) and USB1 .
A USB device that needs additional power
(e.g. external hard disk) is connected to the
USB2 (HDD) input.
USB2
(HDD)
1A
1
Plug the external hard disk to the USB2
(HDD) USB interface of the television;
or
plug the memory stick in USB1 interface of
the television.
-------------------------------------------------------------------------------------------
Notes:
According to the USB standard, the USB1
7
socket of the TV supports a current of 500
mA. Devices such as external hard disk
andetc. that consume more power can only
beconnected to the USB2 (HDD) USB
interface ofthe television.
USB2 (HDD) If you are using a power
7
cable for the external hard disk that you
have connected to the USB interface, then
the power cable of the external hard disk
shall also be unplugged when the TV is
turned off.
You must not disconnect the USB Device
7
from the TV while a file on the USB Device
is being read by the TV.
ENGLISH
47
Advertisement
Table of Contents
