Table of Contents
Advertisement
DETAILED CHANNEL SETTINGS
Antenna settings for digital sat-
ellite channels and searching for
channels automatically with DiS-
EqC 1.0/1.1
Note:
LNB settings described in the following
7
section require significant expertise on
satellite systems. Contact an expert about
the subject.
H
1
Press »
« to return to the TV mode.
2
Select »Source« with »
»
«.
3
Select »satellite« and confirm with »
)
4
Press »
« and select »Settings« with »
and confirm with »
5
Confirm »Channels and Inputs« with »
6
Select »Channels« and confirm with »
– Channel menu shall be displayed.
7
Confirm »Satellite« with »
8
Confirm »Channel Installation Mode« with
»
«.
9
Select »Satellite (Standard)« with »
»
«or if you are using an operator, select
Λ
»Satellite (Operator Mode)« and confirm
with »
«.
10
Press »
« to return to the previous menu.
a
11
Use »
« or »
« to select »Channels« and
V
Λ
confirm with »
« button.
12
Use »
« or »
« to select »Automatic
V
Λ
Channel Scan« and confirm with »
– A utomatic Channel Scan menu shall be
displayed.
13
Select »Other« with »
»
« to confirm.
)
« and confirm with
«.
>
« .
«.
« or
V
«.
« or »
« and press
V
Λ
----------------------------------------------------
Automatic Channel
Scan
Proceed
Other
«
«.
«.
14
Select »DiSEqC1.0« or »DiSEqC1.1« ac-
cording to your current antenna type and
confirm with »
Automatic Channel
Scan
Single
Tone Burst
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Single Cable I
«.
ENGLISH
95
Advertisement
Table of Contents
