Table of Contents
Advertisement
CAUTION
The minimum vertical distance to combustible material above the cooktop is 30
inches. This distance may be reduced to 24 inches if the combustible material
above the cooktop is protected by no less than ¼ inch thick insulating millboard
covered with 28 gauge sheet metal extending 9 inches beyond the sides of the
cooktop and covering the entire bottom of the material to be protected extending
over the top of the cooktop. In lieu of 28 gauge sheet metal, a hood, 28 gauge
sheet metal may be used. Hood shall not be less than the width of the cooktop
and shall be centered over the cooktop and cover the entire bottom of the
material to be protected.
The minimum horizontal distance, outside edge to vertical walls:
Back: 2"
Side: 2"
8
Advertisement
Table of Contents
