Table of Contents
Advertisement
Display assembly
IMPORTANT:
and replacement.
Before removing the display assembly, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
5.
Disconnect the battery (see
Remove the display assembly:
1.
Remove 3 Phillips 2.5x6.0 screws from the left hinge and 3 Phillips 2.5x6.0 screws from the right hinge
bracket (1), and then lift the hinge brackets (2) to remove them..
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
Battery on page
32).
34).
Component replacement procedures
37
Advertisement
Table of Contents
