Yamaha NMAX GPD150-A Owner's Manual page 60

Periodic maintenance and adjustment
Cleaning the V-belt case air filter el-
ement
1. Place the vehicle on the center-
stand.
2. Remove the screws, and then pull
the V-belt case air filter element
cover outward and away from the
V-belt case.
2
7
2
1. V-belt case air filter element cover
2. Screw
3. Pull the V-belt case air filter ele-
ment out, and then clean it with
solvent. After cleaning, remove
the remaining solvent by squeez-
ing the element. WARNING! Use
only a dedicated parts cleaning
solvent. To avoid the risk of fire
or explosion, do not use gaso-
line or solvents with a low flash
point.
[EWA10432]
damaging the air filter element,
handle it gently and carefully,
and do not twist it.
1
1. V-belt case air filter element
4. Apply oil of the recommended
type to the entire surface of the
sponge
squeeze the excess oil out.
NOTICE: To avoid
[ECA10522]
1
material, and then
7-16
TIP
The air filter element should be wet but
not dripping.
Recommended oil:
Yamaha foam air filter oil or other
quality foam air filter oil
5. Insert the element into the V-belt
case.
6. Install the air filter element cover
by installing the screws.
Cleaning the V-belt case check hose
1
1. V-belt case check hose
1. Check the hose on the rear side of
the V-belt case for accumulated
dirt or water.