Star Micronics TUP900 Quick Setup Manual page 7

Printing a test page will allow for confirmation that correct installation and communication are
established and working properly.
Installation is complete. Click "Yes" to let the installer restart the system. Click "No" to restart the
system manually.
Testing – Printing a Printer Self-Test Page
The TUP900, like all Star printers, has a built-in diagnosis printout that can be manually printed to
check the printer's current configuration. This "Self-Test" page also allows the user to confirm that the
printer is in fact operating properly.
To print a printer self-test, simply follow the steps
listed below.
1. Turn the printer's power switch to the OFF
position
2. Press and hold the paper feed switch
(SW1)
3. Turn the printer's power switch to the ON
position
4. Release the paper feed switch (SW1)
NOTE: In order to print a self-test page, the
printer must be properly loaded with paper and
must have its power supply connected to a live
power source.