Advertisement
13. This brings up the camera's home page similar to shown below:
14. The camera is now at the correct IP address with the correct settings.
M
D
OTION
ETECTION FOR
To use Panasonic IP Cameras with the HomeLogic DVR tab, enter the web configuration by typing the
camera IP into the browser and logging on using your username and password. Click Setup, and then
below Buffer/Transfer click Motion Detection. Threshold is the measure of the camera's sensitivity to
change—a lower setting will cause it pick up smaller changes. Sensitivity affects the light sensitivity—a
higher setting will result in more frequent detections of lighting changes.
Typically, the Threshold should be set to the LOWEST setting and Sensitivity should be set to the
HIGHEST.
Please see the DVR Integration Note for full details on setting up the DVR tab in HomeLogic
H
L
DVR C
OME
OGIC
9 of 10
ONFIGURATION
Advertisement
