Advertisement
7. You will be prompted to enter your user name and password to login, as shown in the image
below. Type in the user name and password you just set, and click OK.
C
S
AMERA
ETTINGS
1. After typing in your user name and password, you will be shown the standard browser interface to
the camera.
2. The system may attempt to install an ActiveX control to show the camera image in the browser
window. This control is not needed for proper OneHome operation, but is needed if you wish to
see the camera image on that computer. If any dialogs appear, close them or accept the ActiveX
control as appropriate for your situation.
3. Click Setup at the top to bring up the screen shown below:
4 of 10
Advertisement
