Advertisement
9. Click Static in the Connection Mode to bring up the screen below.
10. Set the IP address to the desired value: we suggest setting the first camera to 192.168.0.80, the
second to 192.168.0.81, and so forth. Set the Default Gateway and the 1
router IP Address, and then click Save to save the settings.
11. If prompted, click to Restart to restart the camera. Note that the camera is now at a different IP
address, so the browser window won't show the camera.
12. Go to the address line in the browser, and put in the new IP address as shown below:
8 of 10
st
DNS server to the
Advertisement
