Table of Contents
Advertisement
• Do not use plastic wrap to cover foods. Plastic
may melt onto the cooktop surface and be very
difficult to clean.
• Use only cookware and dishes recommended as
safe for cooktop use.
• Always use potholders when removing food
from the warming zone as cookware and plates
will be hot.
• Never warm food for longer than one hour (eggs
for 30 minutes), as food quality may deteriorate.
• Do not heat cold food on the warming zone.
• The quantity and type of food being held may
affect the required heat setting
• Do not use large cookware or large amounts of
food as this may cause uneven heating.
• Always hold food at proper food temperatures.
USDA recommends food temperatures between
140
- 170
(except pastries).
8
8
Using the Bridge Elements
This feature is only available on some models.
The three left cooking zones can be used together
as a single cooking zone using the bridge function.
This allows you to cook with larger oblong pans.
The bridge function can only be activated when
the left front cooking zone and the left rear
cooking zones are OFF.
To activate the bridge element:
1
Press the BRIDGE control. The indicator above
the control turns on.
2
The power level indicator lights for the left
front and left rear bridge elements flash.
Select the desired power level.
To adjust the power level:
1
Select ON or BRIDGE for one of the left
elements.
2
Select a number in the element power
settings to adjust the power level. If a power
level is not selected after 10 seconds, the
element's power level remains the same.
To turn off the bridge element:
1
After cooking is complete, press OFF for one
of the left elements.
2
The display for the corresponding element
turns off.
3
If the POWER ON/OFF control is selected, all
elements are turned off.
Using the Triple Elements
This feature is only available on some models.
The triple element, located in the center position,
offers three different sized elements to
accommodate different pan sizes.
To activate the triple element:
1
Press the ON control. The inner element will
activate.
2
Press the ON control again to activate the
dual element. The indicator light below the D
(Dual) turns on.
OPERATION
23
Advertisement
Table of Contents
