Braun PrecisionSensor BP 2550 Manual page 8

When the measurement is complete, an acoustic
signal will sound again, and the reading will be
displayed.
Upper (systolic) value
Lower (diastolic) value
Pulse
Important
15 seconds after switching on the device the
measuring process will begin automatically, even if
the appropriate measuring position has not been
reached.
If at any time you want to discontinue the
measurement, press the I/0 button.
Memory
Depending on your memory setting, your blood
pressure monitor can store readings separately for
up to two users («a» or «b»). After you have turned
on the monitor, the display shows in the lower right
corner
memory for user «a»,
memory for user «b» or
measuring without saving to memory «–».
Changing the memory setting
Turn on the monitor. Press the memory button (B),
until the display shows the memory setting you want
(«a», «b« or «–»). If you do not want to take a
measurement now, turn the monitor off.
If you have chosen memory «a» or «b», readings will
be saved automatically after each measurement.
Each memory «a» or «b» can hold up to 30 readings.
Recalling stored readings
To recall stored readings, press the memory button.
Repeatedly pressing the memory button will call up
one by one all stored readings (including time and
date). The number in the upper left corner of the
display gives the memory position (01 being the
oldest, 30 the most recent) and user «a» or «b».
8