r subnet!
Get network subnet mask
s gateway xxx.
Set network gateway
xxx.xxx.xxx!
r gateway!
Get network gateway
s tcp/ip port x!
Set network TCP/IP port (x=1~65535)
r tcp/ip port!
Get network TCP/IP port
s telnet port x!
Set network telnet port(x=1~65535)
r telnet port!
Get network telnet port
s net reboot!
Reboot network modules
Control setting
Set display auto power on/off control
s autopower z!
z=0~1(z=0 disable, z=1 enable)
r autopower!
Get display auto power state
s autopower mode
Set display auto power control mode
z!
z=1~3(z=1 RS-232, z=2 CEC, z=3 IR)
r autopower mode! Get display auto power mode
s autopower on
Set auto power on timeout y=0~600 seconds
time y!
r autopower on
Get auto power on timeout
time!
s autopower off
Set auto power off timeout y=0~600 seconds
time y!
r autopower off
Get auto power off timeout
time!
22 / 24
Subnet Mask:255.255.255.0
Set gateway:192.168.1.1
Please use "s net reboot!"
command or repower device
to apply new config!
DHCP on, Device can't
config gateway, set DHCP
off first.
Gateway:192.168.1.1
Set tcp/ip port:8000
tcp/ip port: 8000
Set telnet port:23
telnet port:23
Network reboot...
IP Mode: Static
IP: 192.168.1.72
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Mac address:
00:1C:91:03:80:01
Display autopower control
enable
Display autopower control
enable
Display autopower control
by RS-232
Display autopower control
by RS-232
Display autopower on timeout
is 100 seconds
Display autopower on
timeout is 100 seconds
Display autopower off
timeout is 100 seconds
Display autopower off
timeout is 100 seconds