Advertisement
Redback® Touchscreen Wall Plates
With the wall plate connected as per the master unit instructions, power up the master unit.
Step 1:
A number of newer products (eg Redback® A4450, A4460, A 4650) support automatic detection, and this step will be
automatically completed and user interaction skipped where available.
If automatic detection is not available, select the master unit the device is to be used with, from the presented list. If the
master unit does not appear in the list, then it may NOT be compatible or the wall plate may require an update. (Check the
Redback wesbite for compatible products and download a firmware update if available). Refer to section 4.0 for firmware
updating instructions.
Step 2:
The next step is to select the wall plate function. A number of different functional options may be available (e.g. Master Plate
or Zone Plate), This list is specific to the master product. Refer to master product instructions for specifics of the available
functions. Select the desired function from the presented list.
Note: If only one option is available it will be automatically selected.
Step 3:
With the master product and function now selected the unit will present a final confirmation, including information on the
currently programmed image (if not blank) and the selected image to program.
Select "CONFIRM" to continue or "CANCEL" to cancel.
If the loading is cancelled, the unit will halt until the SD card is re-inserted, and then reset and go back to step 1.
If confirmed, the loading process will begin and a progress bar will show completion.
Once loading is complete, the user will be notified if the loading succeeded or failed. If loading is successful the user will be
asked to remove the SD card.
Once the SD card is removed the unit will start after a 5 second hold.
4.0 FIRMWARE UPDATES
If an update is available for a particular function, download and place the supplied ".bin" file on the root folder of a Micro SD
card and insert into the unit. Reset the system via the wall plate menu (Menu->System Actions->Reset, for most products).
The wall plate will reset, scan the micro SD card and find the update and then present a confirmation screen providing
information on the currently loaded and updated program. Select "CONFIRM" to continue.
The update file will not be deleted from the SD card on completion, and hence can be used to update multiple units.
4
Redback® Proudly Made In Australia
www.redbackaudio.com.au
Advertisement
