DeWalt EV CHARGER DXPAEV040 Instruction Manual page 8

Operating Instructions
Display
Charging Status Description
READY Standby status. Power is connected to the
product.
CHARGING Charging is in progress.
CHARGING
The charging process is complete or in
COMPLETE scheduled charging mode.
RESET SUCCESS Network information and local data has been
cleared.
UPGRADING Firmware upgrade is in progress.
Automatic Charging
• With the product powered, it starts charging few seconds after
connecting the charging handle to the vehicle's charging port.
• The product automatically detects outlet voltage and maximum
allowable input current of your vehicle.
1. Press the release lever and take the charging handle off the
handle cradle.
2. Plug the SAE-J1772 connector of the charging handle to the
vehicle's charging port. The charging process starts.
3. The product switches off automatically once the vehicle's
battery is fully charged.
NOTICE: When the charging is complete, press the release lever and
unplug the SAE-J1772 connector� Place the charging handle back
into the handle cradle of the main unit�
Registering and Connecting the Charger
Scan the code below to download the D
to control the charging sessions, monitor the charging status in real-
time and set charging schedules.
Connectivity
The product is equipped with a 2.4 GHz, 802.11b/g/n Wi-Fi to
communicate with local routers and mobile devices.
WALT EV Charger app
E
8
Quick Setup for the APP
Please refer to the quick set-up guide to connect your device with the
free D WALT EV Charger APP.
E
The following functions can be found in the app:
Function Description
Start/Stop Easily control your charge with the touch of a
Charging button.
Set up a Want to charge during off peak hours?
Schedule Schedule future charging sessions with the
APP.
Soft Lock Protect your device from an unauthorized user.
Notifications Receive real time notifications of your current
charge status.
Share an EV Provide access to the APP and EV charger by
Charger sending an invitation to your guests. Without
an invitation, users will not be able to connect
the APP with your D
Energy Monitor Track your spending by entering your kilowatt
per hour cost. The APP will estimate the cost
of your charging sessions.
Charging History Review your charge history.
Device Settings APP main settings (timezone, language, etc.)
User Settings Review your profile.
Firmware Latest versions of the D
Upgrade APP can be found here.
Network Information and Local Data
Reset
• The reset button for network information and local data is located
inside the handle cradle on the main unit.
• Press and hold the reset button for 30 seconds to reset the
product.
Reset button
WALT EV Charger.
E
WALT EV Charger
E