Table of Contents
Advertisement
Troubleshooting
Troubleshooting
If you experience malfunctions or performance issues, review the tables in this
section to resolve the issue yourself. If you still cannot resolve the issue, call Dacor
Customer Service 833-353-5483(USA), 844-509-4659(Canada).
Control Display
Problem
Possible cause
The display
A fuse in your home may be
goes blank.
blown or the circuit breaker
tripped.
The buttons
•
There is foreign matter
cannot be
caught between the
pressed
buttons
properly.
•
Touch model: There is
moisture on the exterior
•
The lock function is set
74 English
For the Microwave Oven
Solution
Replace the fuse or reset the
circuit breaker.
•
Remove the foreign
matter and try again.
•
Remove the moisture and
try again.
Check whether the lock
•
function is set.
Symptom
Cause
General
The buttons cannot
Foreign matter may
be pressed properly.
be caught between the
buttons.
For touch models:
Moisture is on the
exterior.
Control lock is activated.
The oven does not
Power is not supplied.
work.
The door is open.
The door open safety
mechanisms are covered
in foreign matter.
The user has opened the
The oven stops while
in operation.
door to turn food over.
Action
Remove the foreign matter and
try again.
Wipe the moisture from the
exterior.
Deactivate Control lock.
Make sure power is supplied.
Make sure the oven is plugged
in. Check if a fuse has been
blown or circuit breaker has
been tripped.
Close the door and try again.
Remove the foreign matter and
try again.
After turning over the food,
press the Start button again to
start operation.
Advertisement
Table of Contents
