Users Controls - Tesla 22MC335SF User Manual

USERS CONTROLS

1. To view the OSD menu, press the joystick button at the back of the monitor.
2. Configure the options by moving the joystick up/down/left/right.
Joystick
Button
Menu
VGA
Input Source HDMI
DP
Brightness
Contrast
Black Level
Brightness/
Sharpness
contrast
Picture Mode
DCR
Action
Long Press for power off, Short Press for power on / menu.
The below table shows the monitor status as indicated by the light
located on the joystick button.
Press this button.
Push left Exit from the main menu or return to the upper menu.
Push right Enable the main menu or select the menu item.
Select menu items or increase the setting values of the selected
Push up
menu item.
Select menu items or decrease the setting values of the selected
Push down
menu item.
Changes input signal to VGA HDMI or DP.
Adjusts the color contrast and brightness of the screen.
Adjusts display contrast
Adjust display black level
Set display sharpness
Preset color modes
DCR is the ratio between the brightest white and the darkest black
produced by a monitor display. DCR increases contrast ratio by
automatically adjusting the backlight based on image content.
Description
Light Monitor Status
Blue Power on
Red Standby mode / No signal
No light
Power off
Description
5
ENG