Arming The Vrs; Vrs ® Triggered Sequence - Directed Electronics 300 ESP Owner's Manual

Table of Contents

All manuals and user guides at all-guides.com

Arming the VRS

To arm the VRS

, turn the ignition to the ON position and press the

arm button on the remote transmitter for one second. The parking

lights will flash and the siren will chirp once. This can be done

before driving or while driving the vehicle. Once the system is

armed, it will initiate its triggered sequence (see below) if any door

is opened and closed. If you are forced from the vehicle, the sys-

tem will trigger as the door is opened and closed. This is how the

system works to combat intersection carjacking. To protect against

parking lot carjacking, arm the VRS

system will now trigger automatically the next time you or anyone

drives the vehicle. This helps to protect the vehicle if someone

takes your keys and remote transmitter by force in a parking lot.

NOTE: If the VRS

system is armed while operating the vehicle and not

disarmed prior to leaving the vehicle, it is still armed and will trigger the

next time the vehicle is driven.

VRS

Triggered Sequence

Fifteen seconds after the last door has closed, the system's status LED

will begin flashing. This delay is intended to allow you time to dis-

tance yourself from your vehicle in the event of a carjacking.

Forty-five seconds later, the siren begins chirping and the parking lights

begin flashing. This time could be used to notify authorities that your

vehicle has been hijacked, and tell them what the VRS

Fifteen seconds after the siren chirps begin, the siren's output will

change to a continuous blast.

1999 Directed Electronics, Inc.

before leaving the vehicle. The

will do next.

Table of Contents