Table of Contents
Advertisement
Maintenance
DISCONNECTING THE BEVERAGE COOLER
Unplug the power plug from the socket to disconnect the Cooler.
CLEANING YOUR BEVERAGE COOLER
Dusting behind the Cooler and on the ground will improve the cooling effect and save energy. The interior of the
Cooler should be cleaned to avoid any odor. Follow the cleaning procedure below:
1. Unplug the Cooler.
2. Wipe the door seal with warm water.
3. Use soap and warm water to clean the Cooler.
4. Reconnect the Cooler when the Cooler is clean and dry.
NOTE:
Do not use hard brushes, wire brushes, abrasives,
organic solvents, boiling water, acid, or alkaline items
as this may damage the cooler surface and interior.
NOTE:
Do not immerse the Beverage Cooler.
DEFROST
1. Unplug the Beverage Cooler.
2. Remove beverages and cooler contents. Place them properly to prevent melting or spoiling, where necessary.
3. Allow the appliance to defrost naturally at room temperature.
4. If any lingering liquid remains after defrosting, wipe the Beverage Cooler interior with a clean, soft cloth.
5. Power on the appliance.
6. Allow it to run for 2–3 hours, then return any removed beverages to the Cooler.
FREQUENTLY ASKED QUESTIONS
I'm hearing some sounds, what's up with that?
Buzzing or any gurgling sound is normal, as that can be a result of the unit working properly or refrigerating fluid
flowing through the pipeline.
Specifications
• Temperature Range:
• Voltage/Current:
• Net Weight:
• Dimensions:
34–50 °F
115 V~ / 1.1 A
68.3 lb
W 18.9 × H 33.3 × D 17.30 in
9
Advertisement
Table of Contents
