Secondary Settings; Lamp Intensity; Keel Offset - Standard Horizon DS35 Owner's Manual

5.2 Secondary Settings

To access the secondary settings, press and hold
the and
Succeeding depressions of the
keys will step the display through each level of the
secondary settings.
The levels accessible, in succession, are:
•

Lamp Intensity

•

Keel Offset

• Display Damping
• Transducer Settings
5.2.1 Lamp Intensity
Press and hold the
seconds to go to the LAMP mode. To adjust the
lamp intensity, press either the
Intensities of 1, 2 or 3 can be selected; 0=OFF. Press
the key to exit, or press the
keys to advance to the keel offset mode.
Press both
Hold for 3
seconds
Press One
Press both to
step to next
level: Keel
Offset
DS35 User Manual
keys for three seconds.
and
and keys for three
or
and
or
or Press to exit
5.2.2 Keel Offset
In the Secondary mode, with the Lamp Intensity level
displayed, press the
to the Keel Offset display; "+0.0" will be displayed
for adjustment. Keel Offset can be adjusted for any
of the following situations. Displayed depth will be
adjusted accordingly.
• Depth below the water line (positive adjustment
– depending on the distance the transducer is
below the water line)
• Depth below the keel (negative adjustment –
depending on the distance the keel is below
the bottom of the transducer)
• Depth below the transducer (set offset to 0.0)
Note: The keel offset quantity may be entered
in either feet, meters, or fathoms in 0.1 unit
increments.
key.
Press the
Press the
and keys to advance to the Display Damping
mode.
Press both
Hold for 3 seconds
Press Both
Press One
Press both to
step to next
level: Display
Damping
and
or key to set the offset depth.
key to exit, or press the
or
or Press to exit
keys to step
11