1 Purpose of this manual
The purpose of this manual is to provide service personnel (who already have the basic knowledge
necessary for repairing dishwashers) with information on dishwashers equipped with the EDW503
electronic control system, which are produced in the Solaro (MI - Italy) factory.
The EDW503 control system consists of a main circuit board and a control/display board. Both
boards are housed in a single plastic container. It is used in some "DIVA" models.
This Manual describes:
•
General characteristics
•
Control panel and programmes
•
Technical characteristics
•
Guide to diagnostics
For more detailed information regarding the hydraulic circuits and the structural characteristics of the
appliances, refer to the Service Manual for presentation of the "DIVA" structure (publication number
599 35 55–25, 599 36 09-90).
2 PRECAUTIONS
Electrical appliances must be serviced only by qualified Service Engineers.
Always remove the plug from the power socket before touching internal
components.
3 GENERAL CHARACTERISTICS
Power supply
Total power absorption
Mains water supply
Capacity
Consumption (prog. BIO):
Water
Energy
Duration of cycle
Controls
-
ON/OFF
-
Programme start
-
Programme selection
Option selection
-
-
Display
-
Washing system
Water fill level control
Water heating
Temperature control
Drying systems
Safety systems / Alarms
SOI/TD 2005-2 PR
⇒
230 V / 50 Hz (limits 187÷254 V)
⇒
2200 W (Resistance 2000W)
⇒
Pressure Min. / Max. 5 ÷ 80 N/cm²
⇒
9/12 place settings (45/60 cm)
⇒
Lt. 14
⇒
KWh 0,8
⇒
136'-143' (45/60 cm)
⇒
On/Off function button
⇒
By button Start/Reset
⇒
By knob (n°3÷5 programmes)
⇒
By 1 button
⇒
Leds
⇒
Continuous (2600-2800 rpm)
⇒
Pressure switch + Software
⇒
Heating element enclosed in tube (2000 W)
⇒
NTC Temperature sensor
⇒
Active
⇒
Total protection (hydraulic + Software)
5
/26
599 36 83-66