Table of Contents
Advertisement
Product Overview
Figure 15
1. Hand-grip (2)
2. Auger/impeller lever
3. Speed selector lever
4. Quick Stick™ discharge
chute control
5. Traction lever
6. Fuel tank cap
7. Engine oil fill tube/dipstick 15. Snow cleanout tool
8. Chute deflector
g018888
Figure 16
1. Choke
2. Ignition switch
3. Fuel shutoff valve
4. Throttle
g018887
9. Discharge chute
10. Scraper
11. Auger
12. Skid (2)
13. Electric starter button
14. Electric starter plug
5. Recoil starter
6. Oil drain plug
7. Primer
1. Snow cleanout tool (attached to the handle)
Operation
Note: Determine the left and right sides of the machine
from the normal operating position.
Freewheeling or Using the
Self-propel Drive
You can operate the snowthrower with the self-propel feature
engaged or disengaged (freewheeling).
To freewheel, slide the wheels inward and insert the axle
pins through the axle holes, but not through the wheel hubs
(Figure 18).
g019015
To self-propel, axle pin through the holes in the wheel hubs
and the inner axle holes (Figure 19).
g019014
13
Figure 17
Figure 18
Figure 19
Advertisement
Table of Contents
