Getting Started; After Use - Blaupunkt 32HBG5000 User Manual

Connecting the network cable (LAN connection)
You c an also es tablish
an i nternet c onnection
via WiFi.

Getting started

Powering the TV set on and off
Powering on
Check that the TV is in standby mode. This means the mains cable must be connected to a
working mains socket.Then press the power button on the device or the
remote to turn on the TV.
Powering off
To power the TV off, either press the Power button on the device or press the
the remote control.

After use

Cleaning
Warning: Make sure t he devi ce i s unpl ugged f rom t he m ains pow er bef ore
cleaning. Otherwise, there is a risk of electrocution!
Never spill or spray any type of liquid into the unit. Only use a clean, dry cloth for cleaning
the casing. Never use aggressive liquids. When very dirty, use a slightly dampened cloth.
Clean the screen with a special cleaning cloth for screens.
Caution: when yo u c lean the screen, hold the device steady with one hand
and c arefully c lean t he sc reen w ith t he ot her. O therwise, t he device c ould t ip
over and get damaged or cause injuries.
Storage when not in use
If you do not plan to use the device for an extended period of time, unplug the power cord from
the socket and remove the batteries from the remote control. Make sure that the storage
temperature is between 15 °C and 45 °C and the relative humidity does not exceed 90%.
Transport
If you wish to move the device a short distance, proceed as follows to transport the device:
1. Disconnect the device from the mains.
2. Remove all cables connected to the device.
3. If you wish to move the device outside your building, demount the base and the optional
side supports or the mounted wall bracket by reversing the procedure.
4. Pack the TV set up carefully. Take special care to ensure the corners of the casing and
the screen are well protected.
5. Take the TV set and its accessories to its new location and recommission it.
12
button on the
button on