Table of Contents
Advertisement
7. Align the heatsink to the CPU socket using the guide pins and make sure the gold triangle is in the
correct orientation. Then place the heatsink onto the top of the CPU socket.
8.
Secure the heatsink by tightening the screws in sequential order (1g2g3g4).
Note:
When removing the heatsink, loosen the screws in reverse order (4g3g2g1).
NOTE!
•
When installing the heatsink to CPU,use T30-Lobe driver to tighten 4 captive nuts in sequence as 1-4.
•
The screw tightening torque: 8 ± 0.5 kgf-cm.
1
4
2
7
System Hardware Installation
- 25 -
3
Advertisement
Table of Contents
