How To Use; Night Light Function; Sensor Function - Xiaomi Mi Motion-Activated Night Light 2 User Manual

Mounting point is over 1,9
m above the floor
Mounting point is between
0.5-1.5 m above the floor
Mounting point is below 0.5
m above the floor
Note: For different mounting heights, the angle needs to be adjusted based on the user's
height and the desired usage scenario to achieve the optimal result.

How to use

Night Light Function

The night light will turn on automatically when it detects human body motion in the dark
environment and will turn off automatically after a while if no human body motion is around.
The night light function is enabled by default with its lighting up for 15 seconds in 2.5
lumens.
You can enable or disable the night light function on the page of Mi Motion-Activated Night
Light 2 (Bluetooth) in the app. The brightness can be adjusted between 2.5 to 25 lumens and
the lighting up time between 15 to 60 seconds.
Note: To do the settings or update the firmware in the app, enable the Bluetooth function on
your phone first, then move your body around within the induction range of the night light
or push the Bluetooth switch to either side.

Sensor Function

Facing downwards
Facing straight forward
Facing upwards
7