Advertisement
Clean and prepare a surface for
installation
Insert the power adapter into the
socket
Reset to factory settings
Disconnect the power adapter, press and hold a power button for 5 seconds, and when the
light strip run colors - red, green, blue, release a button. When indicator light will change
color to yellow, it would mean that the reset was successful.
* When the light strip used in new scheme, update the factory settings and connect the light
strip with this scheme.
Model: YLDD01YL;
Color mode: RGB;
Lifetime: about 25000 hrs;
OS: Android і ОС IOS;
Wireless connection: Wi-Fi IEEE 302.11 B / G / N 2,4 GHz;
Temperature range: -10- + 40'C;
Humidity range: 0% - 85%;
Input voltage: 12 В, 1 А (-)-(•-(+) ;
Power: 100-240 V, ~ 50/60 Hz, 0,5 А;
Capacity: 12 Wt (60 х 0,2 elements / LED module).
Usage
Glue to a surface of installation
Press once "□", light strip lights on. One
more time press «□», light strip is off.
Press and hold «□», to choose light color.
Main parameters
Intellectual operation
1. Scan two-dimensional code or download Yeelight mobile application in
App store.
2. To ensure that the power light is switched on, open a program and
follow the instructions in the application.
* Make sure that Wi-Fi and Internet connection are available.
This product and intellectual platform support MIUI system, and be in a
network relationship with the rest of intellectual platform products.
Cautions
1. Before using this product, check the voltage that is supplied to him; voltage
mismatch can cause damage to the product and present danger.
2. The LED module is not replaceable, disassemble the product without
permission.
3. Light power allocates heat during exploitation, so you need to ensure
environmental air ventilation to cool the light strip.
Advertisement
