Table of Contents
Advertisement
Problem
Food soil remains on
dishes.
Noise
Dishes don't dry.
Possible Cause
Improper cycle selection.
Water temperature is too
low.
Dishwashing detergent
was not used.
Low inlet water pressure.
Water jet holes on spray
arms blocked.
Improper loading of
dishes.
Filters are clogged.
Too much Unremoved
food debris on dishes.
Some level of noise is
normal during operation.
The appliance is not level. • Adjust leveling feet.
Nozzle arm knocking
against dishes.
Water pressure is too
high.
Rinse agent dispenser
empty.
Tablets used may not
have a built in rinse aid.
This will reduce the drying
performance.
A cycle without the Extra
Dry option was selected.
Solutions
• Select correct cycle based on soil
level and type of dishware being
washed.
• Check water supply connection or
water heater setting.
• Use recommended detergent.
• Water pressure should be between
20 and 80 psi.
• Clean the spray arms.
• Make sure dishes do not block spray
arm rotation or interfere with
detergent dispenser.
• Clean filters.
• Large particles of food residues
should be removed from the dishes
before staring wash.
• Detergent cover opening.
• Drain pump at the beginning of drain
cycle.
• Reposition the dishes.
• Adjust water pressure.
• Check and refill the rinse agent
dispenser if empty. For better drying
result, slightly open the door after
operation.
• Change to a tablet that includes a
rinse agent (contact the tablet
manufacturer if unsure). Alternatively,
you can use a liquid rinse agent in
the dispenser if the tablets don't
have a rinse agent built in.
• Select a cycle that defaults to the
Extra Dry option.
EN
45
Advertisement
Table of Contents
