Connection Via Bluetooth - Canton Smart Sounddeck 100 Short Manual

CONNECTION VIA BLUETOOTH

You can conveniently connect the Sounddeck 100 to your (mobile) device via Bluetooth
wireless technology using the Smart-remote. Please proceed as follows:
Establish Bluetooth
Select the Bluetooth
1
arrow keys ( , ) on the Smart-remote.
Now press the button „Bluetooth Pairing" on the Smart-remote. The display
2
indicates [BTP].
Start the search on your (mobile) device.
3
Select Sounddeck 100 as the playback device.
4
Note:
• If you have assigned a name to the Sounddeck 100 during network setup
(e.g. living room), this name is also displayed here.
After confirmation, the connection is established automatically and the message
5
[BT-] followed by [CON] appears on the display.
Start a title on your (mobile) device and the sound should automatically output
6
via Sounddeck 100.
If the connection has failed, you receive the message [FAI].
7
If the (mobile) device requires a code, enter 0000.
8
If [DIS] appears on the display, your (mobile) device is out of range or logged
9
off.
connection
®
input [BT] on the LED display by repeatedly pressing the
®
®
English
®
3 3 5