Craftsman 247.37683 Operator's Manual page 11

3. The ropeguide is attachedto the right sideof the upper handle.
See Figure3. Loosenthe wingnut whichsecuresthe ropeguide.
a. Holdblade controlagainstupperhandle.
b. Pull starterropeout of the engine.Releasebladecontrol.
c. Slip starterrope intorope guide.
d. Tightenwingnut.
4. Insertpost on cable tie intohole providedon the lowerhandle.
Pull cabletie tight and trim excess.See Figure4.
Attaching the Grass Catcher
1. Followstepsbelowto assemblethe grass catcher.Makecertain
bag is turnedrightside out beforeassembling(warninglabel will
be on theoutside).
a. Placebag overframeso that its blackplasticside is at the
bottom.
b. Slip plasticchannelof grass bag overhookson the frame.
See Figure5. All the plasticchannelsexceptcentertop of
bag attachfromoutsideof bag.
c. Attachcentertopof bag from insideof bag.
2. Followthe stepsbelowto attachthe grass catcher:
a. Lift reardischargedoor.See Figure6.
b. Placegrasscatcheron the pivot rod.Let go of discharge
door so that it restson the grasscatcher.
Neveroperatemowerunlessthe hookson the grass catcherare
firmlyseatedon the pivot rod and the reardischargedoor restsfirmly
againsttopof the grass catcher.
l
Figure4
Figure3
f
11
Figure5
Figure6