Osd Position; Osd Language; Sleep Timer; Display Info - PROTRON PLTV-32C User Manual

OMPLTV32C.book Page 22 Thursday, June 2, 2005 9:07 AM
Configuring the Display

OSD Position

A sub-menu that controls the position of the OSD on the
screen. Use the four direction controls to move the OSD
to the desired position.

OSD Language

A sub-menu that selects the language used for the OSD.
The options are English, French, and Spanish.

Sleep Timer

A sub-menu that activates and sets a sleep timer that
automatically puts the display into standby mode when
there is no activity for a specified period. The timer may
be turned off or set to 10, 20, 30, 60, 90, or 120 minutes.

Display Info

Press ENTER to show information about the display:
Source—The currently selected signal source
•
• Resolution—The resolution of the image on the
display
• H Sync—The horizontal sync frequency
• V Sync—The vertical sync frequency (frame/field
rate)
• Version—The version of the firmware currently
installed on the display
GENERAL SETTINGS
OSD Timeout
OSD Position
OSD Language
Sleep Timer
Display Info
All Reset
Deinterlace
: Select
GENERAL SETTINGS
OSD Timeout
OSD Position
OSD Language
Sleep Timer
Display Info
All Reset
Deinterlace
: Select
GENERAL SETTINGS
OSD Timeout
OSD Position
OSD Language
Sleep Timer
Display Info
All Reset
Deinterlace
: Select
GENERAL SETTINGS
OSD Timeout
OSD Position RESOLUTION
OSD Language
Sleep Timer
Display Info
All Reset
Deinterlace
: Select
22
UP
LEFT RIGHT
DOWN
OSD Position
H Pos: 0 V Pos: 0
MENU : Exit ENTER : Enter
ENGLISH
FRENCH
SPANISH
MENU : Exit ENTER : Enter
OFF
10 Min
20 Min
30 Min
60 Min
90 Min
120 Min
MENU : Exit ENTER : Enter
SOURCE
TV
720x240
H SYNC 49KHz
V SYNC 60Hz
VERSION
26A1NP1Y-V1.10-NB
MENU : Exit ENTER : Enter