Operating The Display; Using The Buttons On The Display; Turning The Display On And Off; Selecting The Video And Audio Source - PROTRON PLTV-3250 User Manual

OMPLTV3250-1.book Page 9 Monday, July 17, 2006 8:15 PM

Operating the Display

Using the Buttons on the Display

There are a number of touch-sensitive buttons at the bottom right of the screen. To press one,
simply touch its label.

Turning the Display On and Off

There is a power switch on the bottom of the display and a power button on the front of the
display and on the remote. The power switch is used to cut off power completely, whereas the
power button turns the screen off but allows the remote to continue working.
To turn the display on:
1. If the power light on the front of the display (bottom right) is off, turn on the power switch
on the bottom of the display.
2. Press the power button.
To turn the display off:
1. Press the power button.
2. If the display will be unused for an extended period of time, turn off the power switch on the
bottom of the display and disconnect the power.

Selecting the Video and Audio Source

The signal source may come from any of the input blocks on the sides or bottom of the display.
The SOURCE button cycles through these.
To change the audio/video source, press the SOURCE button until the correct source is selected.
The SOURCE button cycles through the following sources:
• TV
• DTV
• Component1
• Component2
• AV1
• AV2
• HDMI
• S-Video
• VGA

Adjusting the Volume

The audio volume may be adjusted from the remote or the front of the display.
To change the volume, press the VOL
VOL – buttons on the remote.

Selecting the Television Channel

The television channel may be selected from the remote or the front of the display.
and VOL buttons on the display or the VOL + and
9