PROTRON PLTV-26CM User Manual page 18

OMPLTV26CM.book Page 12 Friday, September 30, 2005 9:45 AM
Using the Remote Control
Button(s) Function
Displays current source and television channel information
Mutes the audio
Selects the MTS (Multichannel Television Sound) audio channel used
for television: Mono, Stereo, or SAP (Secondary Audio Programming)
Turns surround sound simulation on and off
Adjusts the display's video settings for particular types of video:
Cinema, Sport, Vivid, Hi-Bright, and User (video options set in the
Video menu—see "Video" on page 15)
Sets the display sleep timer. The timer can be turned off or set to 30,
60, 90, or 120 minutes.
Used to enter numbers on the display and to select the television
channel
Switches to the channel number entered via the keypad
Returns to the previous channel
Brings up the On-Screen Display
Selects the aspect ratio used by the display: 4:3 or Full (16:9)
FULL
4:3
Note: You cannot change the aspect ratio when Picture-in-Picture is
active (see below).
Used to navigate display menus
In addition, the VOL and VOL
buttons adjust the volume, and
the CH and CH
buttons change the channel when the signal
source is set to TV.
12