Table of Contents
Advertisement
INTERCHANGEABLE HEAT EXCHANGER PIPING DIRECTION GUIDE LINE
The simulation below is based on FCU FWC-G Unit. From right piping direction to left piping direction.
To perform this simulation, please seek advice from the trained staff.
This simulation required minimum of two trained servicemen.
Changing the original HEAT EXCHANGER PIPING DIRECTION will cause performance drop of 15% to 20%.
STEP 1 - Remove the Drain Pan.
STEP 2 - Remove the Drain Guide.
STEP 3 - Unscrew the Adaptor Holder that is connected to
the Side Panel and Heat Exchanger Distributor, then
remove the Adaptor Holder.
ADAPTOR
HOLDER
! WARNING
DRAIN PAN
STEP 4 - Unscrew the Heat Exchanger from the other Side
SIDE
PANEL
HEAT
EXCHANGER
11
DRAIN
GUIDE
Panel.
DRAIN PAN
Advertisement
Table of Contents
