Denon AVR-S670H Owner's Manual page 156

Contents Connections
11
Perform the settings for Audyssey Dynamic EQ
Audyssey Dynamic Volume
The following screen is displayed during the analysis. Configure the
settings as preferred.
Audyssey Setup
Audyssey Dynamic EQ maintains bass, clarity and
surround sound at low volumes letting you enjoy late-night
movies and television. Turn on Dynamic EQ?
Dynamic EQ corrects the frequency response in consideration of
0
the audio characteristics of the room and human hearing ability so
that sound can be heard even at low volume.
This is recommended when using the unit with the volume turned
down, e.g. when enjoying a movie or TV program in the middle of
the night.
Dynamic Volume adjusts the output volume to the optimal level
0
while constantly monitoring the level of the audio input to the unit.
Optimal volume control is performed automatically without any
loss in the dynamism and clarity of the sound when, for example,
the volume suddenly increases for commercials shown during
television programs.
Front panel Display
Playback
® and
® .
Yes
No
Rear panel
Settings
12
When the analysis and storage ends, unplug the Sound
calibration microphone from the SETUP MIC jack on the
main unit and then press "Next".
Audyssey Setup
Back
13
Select "Details" and press ENTER to verify the
measurement results.
Subwoofers may measure a greater reported distance than the
0
actual distance due to added electrical delay common in
subwoofers.
NOTE
0 Do not enable new speakers in speaker configuration menu after Audyssey
Setup. If it is changed, run Audyssey
optimum equalizer settings.
156
Remote
Tips Appendix
Now Analyzing and correcting your room data.
Please disconnect the microphone from your AVR.
100%
Applying room corrections.
Next
® Setup again in order to configure the
Index
®