Denon AVR-S670H Owner's Manual page 143

Contents Connections
Screensaver
Select the screen saver setting.
A screen saver is activated if no operation is performed for more than 5
minutes when no video signal is input or when the same screen (e.g. the
setup menu) is displayed.
Use cursor Up/Down/Left/Right to clear the screen saver.
On: Turns screen saver on.
Off
Turns screen saver off.
(Default):
0 The screen saver is activated in the following cases.
0 When the setup menu is displayed
0 When no video signal is input
0 When the HEOS Music, USB, Bluetooth or Tuner playback screen is displayed
Front panel Display
Playback Settings
4K/8K Signal Format
Set the format of 4K and 8K signal to be played back by this unit when the
TV or playback device connected to this unit is HDMI 4K or 8K signal
compatible.
o 4K/8K Signal Format
Sets the signal format options for devices connected to each input on
this unit.
Standard:
Enhanced
(Default):
8K Enhanced:
143
Rear panel
Tips
Select if your TV and the source device
support 4K 60Hz 4:2:0 8 bit video signals.
Select if your TV, the source device, and
cables support high quality 4K 60Hz
4:4:4 8 bit, 4:2:2 or 4:2:0 10 bit video
signals.
Select if your TV, the source device, and
cables support high quality 8K 60Hz or
4K 120Hz video signals.
Remote Index
Appendix