Table of Contents
Advertisement
5. INSPECTIONS, TESTS, AND MAINTENANCE
WARNING
!
Any system maintenance that involves placing a control valve or detection system out of service will
impair the fire protection capabilities of that system. Prior to proceeding, appropriate impairment
procedures per NFPA 25 shall be followed with the notification of all Authorities Having Jurisdiction.
Consideration should be given to employment of a fire patrol in the affected areas.
Failure to follow these instructions could cause improper system operation, resulting in serious
personal injury and/or property damage.
NOTICE
The building owner is responsible for maintaining the fire protection system and devices in proper
operating condition. The Viking VFR-500 Release Control Panel must be kept free of foreign matter
and environmental conditions that could impair its operation. Refer to VFR-500 Installation and
Operation Manual for appropriate testing procedures. For minimum maintenance and inspection
requirements, refer to NFPA 72 and NFPA 25. In addition, the Authority Having Jurisdiction may have
additional maintenance, testing, and inspection requirements that must be followed.
6. CONTACT
The VFR-500 is available through Viking distributors only. Contact your local Viking sales office, which can be found on
our website:
www.vikinggroupinc.com/locations
The Viking Corporation
5150 Beltway SE
Caledonia, MI 49316
Tel.: (800) 968–9501
Fax: 269–818–1680
Technical Services: 1–877–384–5464
techsvcs@vikingcorp.com
F_081022 Rev 01 November 2023
TECHNICAL DATA
Multi-Hazard Release Control
Panel Model VFR-500
Page 4 of 11
Advertisement
Table of Contents
