Table of Contents
Advertisement
Keys
On / Off key
It is used to turn on or off the machine.
In On position, the machine switches on
with the last programme in use. In Of
position, indicators on the display will
turn off.
If the Half Load, Tablet Detergent, Child
Lock and Time Delay functions were
selected in the previous programme
used, these functions will remain active
when the machine is turned off and
on again. If you want to disable these
functions after turning the machine
off and on again, you must press the
relevant keys again.
Start / Pause / Cancel key
It is used to start, pause or cancel the
selected programme or function.
To press the Start / Pause / Cancel key,
wait for two seconds after you turn on
the machine by pressing the On / Off
key. An image will be displayed within
this time.
Programme Selection key
It is used to choose the washing
programme you selected in the "Table
of Programme Data and Average
Consumption Values".
Half Load key
It is used to operate the machine
without loading it completely.
1. Load your dishes in the machine as
you like.
2. Press the On / Off key.
3. Select the desired programme and
press the Half Load key. Half Load
(
) indicator will appear on the
display.
4. Press Start / Pause / Cancel key to
start the programme.
C
With the Half Load function you can
save both water and power while
using the lower and upper baskets
of the machine.
Tablet Detergent key
This function provides better drying
performance with the multi-purpose
detergents such as 2in1, 3in1, 4in1,
5in1, all in one, etc., depending on the
hardness level of the supply water. Look
at the "Table of Programme Data and
Average Consumption Values" to see
which programmes the Tablet Detergent
function can be used with.
C
Tablet Detergent Indicator
when the Tablet Detergent function
is selected.
Time Delay key
It is used to select the Time Delay
function. You can delay the start of the
selected programme up to 24 hours
with increments of 30 minutes thanks to
the Time Delay function.
Express key
This option allows you to shorten the
selected programme; the dishwasher
then uses higher water pressure and
consumes less energy and water.
Preparing the machine
1. Open the tap.
2. Plug in to the socket.
3. Open the door of the dishwasher.
4. Place the dishes in accordance with
the instructions in the user manual.
5. Make sure that the upper and lower
impellers rotate freely.
6. Put adequate amount of detergent
into the detergent dispenser.
7. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
8. Close the door of the dishwasher.
31 EN
lights
Advertisement
Table of Contents
